Inhaltsverzeichnis
Lenovo Ideapad 1(i)-11IGL05
- Recovery-Informationen: Windows Recovery
- Modell-Nummer: z.B. 81VT| 82GV001HGE
Lenovo Ideapad 1-11IGL05 | |
---|---|
Chipsatz | Intel SoC Platform (Gemini Lake) |
CPU | Intel Celeron N4020 / 1.1 GHz (2.8 GHz) / 4 MB Cache |
RAM | 4 GB DDR4 (mitgelieferter Speicher ist angelötet) |
GPU | Intel UHD-Grafik 600 |
Display | 29.5 cm (11.6„) LED-Hintergrundbeleuchtung 1366 x 768 |
Audio | Realtek ALC269Q |
Touchpad | Designware I2C HID Multi-Touch |
HDD | SanDisk 64 GB eMMC / Toshiba 128 GB NVME |
Anschlüsse | 2x USB 3.1, HDMI, microSD, Kopfhörer-/Mikrofonbuchse |
Wireless | 802.11a/b/g/n/ac, Bluetooth 4.2 |
Kartenleser | Micro-SD |
Webcam | Webcam: 0.3MP |
Akku | 32 Wh Lithium-Ion |
UEFI | EFI v2.60 by Phoenix Technologies Ltd. 9HCN20WW 64Bit |
Modelle
- Lenovo Ideapad 1(i) 11IGL05
UEFI-Firmware
Die 64bit-EFI-Firmware wird gesteuert über das Lenovo Setup Utility (). Dieses Programm wird gestartet durch Betätigen von <F2>, sobald das Lenovo-Logo sichtbar wird.
- Im UEFI unter Configuration:
- Wireless LAN: Enabled
- Intel Virtual Technology: Enabled
- Intel Hyper-Threading: Enabled / -
- Hotkey Mode: Disabled
- FoolProff Fn Ctrl: Disabled
- Unter Security:
- Intel Platform Trust Technology: Enabled
- Secure Boot: Disabled
- Unter Boot:
- Boot Mode: UEFI
- USB Boot: Enabled
- PXE Boot to LAN: Enabled
- Im Bereich Boot Priority Order sollten mindestens die folgenden Einstellungen nach der Installation zu sehen sein:
- grub
- NVME Card: Toshiba 128 GB
Zum Abschluss unter Exit den Punkt Exit Saving Changes auswählen und mit Enter das Speichern bestätigen.
Linbo-Start zur Ersteinrichtung
Das Netbook hat keine LAN-Schnittstelle, daher erfolgt die Ersteinrichtung über einen der PXE-USB-LAN-Adapter (schwarzes Schild am Kabel) von der Firma Dell. Das Netbook kann über diesen Adapter einen PXE-Start über das Netzwerk ausführen. Die Einrichtung funktioniert wie bei Netbooks mit LAN-Schnittstelle.